Advertisement
Read all instructions carefully before beginning installation. Save these instructions.
CAUTIONS
• Read entire installation instructions carefully before beginning installation and save these instructions.
• DO NOT climb on pole or table.
• Follow the assembly and operation instructions included with the fan.
• Use ONLY Hunter replacement parts.
• DO NOT assemble or place this fan on unlevel ground.
• Install this accessory table ONLY on Hunter
WARNINGS
• To reduce the risk of the fan assembly tilting or falling, never place objects on the table with a com-
bined weight of more than 20 lbs.
Troubleshooting
Table wobbles.
1. Remove all objects from the table. Carefully lift the fan to ensure all three
feet are properly installed.
2. Check that the notches in the table are sitting properly on the pin.
3. Tighten all screws.
fan models 20523 and 28492.
TM
For other problems or ques-
tions, contact the Hunter Fan
Company Technical Support
at
1-888-830-1326
or
http://www.hunterfan.com
Advertisement
