Advertisement
2. Attach the upper adapter to the table with
six adapter screws with washers. Thread the
lower adapter into the upper adapter and
rotate one to two turns.
Note: The lower adapter should not be
over-tightened. It should remain loose in
the upper adapter to properly attach to the
table.
Table
Step 3-4
Lower Pole
Segment
Step 2
Hardware Needed:
Adapter Screw
64193-03-247
(x 6)
Lower
Adapter
Table
Adapter
3. Being careful not to damage the pole finish,
(with assistance from at least one other person)
place the hole in the center of the table over the
lower pole segment. Align the notch in the lower
adapter with the bolt. Rest the table on the bolt.
4. With the notch resting on the bolt, rotate the
table clockwise to secure it to the pole.
Table
Hardware Needed:
Washer
64187-01-247
(x 6)
Upper
Advertisement
