Samsung SCD-6080 User Manual page 30

Operating Your Camera
• moTion DeT : This product has a feature that
allows you to observe movement of objects in
4 different areas on the screen, and the words
<moTion DeT> appear on the screen when
movement is detected.
You can monitor activity more efficient.
1) When the SPECIAL menu screen is displayed,
press the Function Setup switch so that the
arrow indicates <moTion DeT>.
2) Set up the mode using the Function Setup switch.
- AREA SEL : You can specify up to 4 motion detection areas to your preference.
Select the desired type of motion detection area.
According to the selected area type, top/bottom/left/right coordinates change.
- AREA: Specify the use of the selected motion detection area.
If selected <on>, the area is marked on the screen.
- ALARM OUT: Specify the use of output signal on motion detection.
- UP/DOWN/LEFT/RIGHT: Change the position of the selected area.
- SENSITIVITY : The lower the figure is, the higher the sensitivity is and the camera can
track a slightest movement.
- RETURN : Save the motion detection settings and return to the OPERATION SETUP
menu.
Motion detection area is marked only in MOTION DET menu, and not displayed on the monitoring
`
J
screen.
• privACy : Mask an area you want to hide on
the screen.
1) When the SPECIAL menu screen is displayed,
press the Function Setup switch so that the
arrow indicates <privACy>.
2) Set up the mode using the Function Setup
switch.
- AREA : You can select up to 16 PRIVACY areas.
- MODE : Determines whether to use the area
selected in the AREA.
- MASK COLOR : Determine area color. You can select Green, Red, Blue, Black,
White, Gray.
- TOP/BOTTOM/LEFT/RIGHT : Adjust the size and position of the selected area.
- RETURN : Select this to save the PRIVACY menu settings and return to the SPECIAL
menu.
30_ Operating Your Camera
MOTION DET
1. AREA
►
2. MODE
3. ALARM OUT
.... .... .... ....
4. TOP
*
.... ....
5. BOTTOM
*
.... .... .... ....
6. LEFT
*
.... ....
7. RIGHT
*
.... ....
8. SENSITIVITY
*
9. RETURN
PRIVACY AREA SETUP
1. AREA
►
2. AREA MODE
3. MASK COLOR
.... .... .... ....
4. TOP
*
.... .... .... ....
5. BOTTOM
*
.... .... .... ....
6. LEFT
*
.... .... .... ....
7. RIGHT
*
8. RETURN
AREA1
OFF
OFF
60
.... ....
480
60
.... ....
900
.... ....
3
AREA1
OFF
GRAY
80
180
190
290