Samsung SCD-6080 User Manual page 11

inside
Item
SETUP Switch
a
C-VIDEO
b
Wiring Cover
c
Lock Release
d
The switch is used for setting and adjusting the camera's functions and
properties.
Press and hold this switch more than 2 seconds to display the main menu
on the screen.
Move this switch left or right to move the cursor or change
_ / +
the value in the menu.
Move this switch up or down to move the cursor in the
$ / %
menu.
Press the switch to set the function in menu. To move to a sub-
@
menu item in the menu, press this switch.
Analogue video output terminal of C-Video.
Use a monitor cable for testing the camera with a portable display.
(for installation)
If you drill a hole in the wiring cover for wiring, remove
the cover and attach the provided dustproof plate to it,
and arrange the cables through the plate.
The dust-proof plate is to prevent outside dust from
`
inflow to the wiring compartment.
To separate the bracket from the main unit for the installation or to separate
the camera from an installed camera, push this release and turn the main
unit in the marked direction of <UNLOCK>.
Description
English _11