BACKLiGHT
This camera is designed so that it delivers a distinctive subject and background at the
same time, even when the subject is in backlight, by adopting a function of the proprietary
WN2 DSP chip.
1. When the SETUP menu screen is displayed,
select <BACKLiGHT> by using the Function
Setup switch so that the arrow indicates
<BACKLiGHT>.
2. Select a desired mode using the Function Setup
switch depending on the camera purpose.
• BLC : Enables a user to select a desired area
on a picture and view that area more clearly.
- LEVEL : Adjust level of the BLC function.
- TOP/BOTTOM/LEFT/RIGHT : Adjust the area to be enhanced.
• HLC (High Light Compensation) : If the scene contains extremely bright light areas
such as; from car headlight, the light can mask out much of the on-screen detail.
- LEVEL : Adjust level of the HLC function.
- MASK COLOR/TONE : Change the color / brightness of the masking area. (Black,
Red, Blue, Cyan, Magenta)
- TOP/BOTTOM/LEFT/RIGHT : Adjust the area to be enhanced.
• off : Not being used
3. Select a desired mode using the Function Setup switch.
BLC SETUP
1. LEVEL
►
....
2. TOP
.... .... ....
3. BOTTOM
....
4. LEFT
.... .... ....
5. RIGHT
6. RETURN
Because there can be a difference in the effectiveness of HLC according to the amount of light
`
J
area in the screen, optimize the installation angle for the best HLC performance.
When dark, the HLC is only activated when a bright light exceeding a specific size. (In NIGHT ONLY
`
mode).
The HLC is not activated in day light or when bright light is not present at night. (In NIGHT ONLY
`
mode).
MIDDEL
►
.... .... ....
30
*
....
75
*
.... .... ....
30
*
....
75
*
1. LENS
2. EXPOSURE
3. WHITE BAL
4. SSDR
5. BACKLIGHT
►
6. SSNR3
7. DAY/NIGHT
8. SPECIAL
9. EXIT
HLC SETUP
1. LEVEL
.... ....
.... ....
2. MASK TONE
*
....
.... .... ....
3. TOP
*
.... .... ....
....
4. BOTTOM
*
....
.... .... ....
5. LEFT
*
.... .... ....
....
6. RIGHT
*
7. RETURN
MAIN SETUP
DC
ATW
ON
OFF
ON
AUTO
MIDDEL
5
30
75
30
75
English _25