Samsung SCD-6080 User Manual page 29

• imAGe ADJ :
1) When the SPECIAL menu screen is displayed,
select <imAGe ADJ> by using the Function
Setup switch so that the arrow indicates
<imAGe ADJ>.
2) Select a desired mode using the Function
Setup switch.
- Monitor : Please change the settings value of
video appropriate to your monitor.
• LCD : Please select this menu item when
using an LCD monitor.
• USER : Please use this menu item when
using a monitor other than standard ones.
You can change the gamma, PED level and
color gain in the sub menus.
- V-REV : You can flip the picture vertically on the screen.
- H-REV : You can flip the picture horizontally on the screen.
- D-ZOOM : You can use a digital zoom of x1 ~ x16.
- SHARPNESS : As you increase this value, the picture outline becomes stronger and
clearer. Adjust this value appropriately depending on the sharpness of the picture.
- FONT COLOR : You can change the OSD font color. (White, Yellow, Green, Red, Blue)
- VIDEO FORMAT : Sets the video output format of the C-Video port on the camera
provided for test and installation.
- VIDEO SIZE : Sets the image resolution of the HD-SDI output of the camera.
Select the desired setting and press the SET button. (1080i 50, 1080p 30, 720p 50,
720p 60, 1080i 60)
- RETURN : Select this to save the settings for the IMAGE ADJ menu and to return to
the SPECIAL menu.
If you increase the sharpness level excessively, the image may be displayed abnormally or it
`
J
can cause a noise.
SPECIAL
1. CAM TITLE
2. IMAGE ADJ
►
3. MOTION DET
4. PRIVACY
5. COMM ADJ
6. LANGUAGE
7. RESET
8. RETURN
IMAGE ADJ
1. MONTIOR
►
2. H-REV
3. V-REV
4. D-ZOOM
5. SHARPNESS
6. FONT COLOR
7. VIDEO FMT
8. VIDEO SIZE
9. RETURN
English _29
ON
ATW
ON
ON
ENGLISH
LCD
OFF
OFF
OFF
ON
WHITE
CVBS-NTSC
1080p 30