Appliance Setup; Remove Glass Assembly; Remove The Shipping Materials; Clean The Appliance - Heatilator CNXT4236IT Owner's Manual

12 12

Appliance Setup

A. Remove Glass Assembly
See Section 12.G.
B. Remove the Shipping Materials
Remove shipping materials from inside or underneath the
fi rebox.
C. Clean the Appliance
Clean/vacuum any sawdust that may have accumulated in-
side the fi rebox or underneath in the control cavity.
D. Accessories
Install approved accessories per instructions included with
accessories. Refer to Section 16.
WARNING
Shock Risk
Fire Risk
Use ONLY optional accessories approved
for this appliance.
• Using non-listed accessories voids
warranty.
• Using non-listed accessories may result
in a safety hazard.
• Only Hearth & Home Technologies
approved accessories may be used
safely.
Heatilator • Caliber CNXT Series • 4047-132 Rev P • 11/07

E Lava Rock, Vermiculite, Rockwool Placement

Vermiculite and
lava rock
placement on
sides and front
of hearth pan.
Figure 12.1 Placement of Lava Rock, Vermiculite, Rockwool
Place the lava rock and vermiculite.
• See Figures 12.1 - 12.3.
• It is not necessary to use the entire bag. Save the
remaining amount for future use.
Figure 12.2 Placement of Lava Rock
Figure 12.3 Placement of Vermiculite
Rock wool
Vermiculite and
placement
lava rock
(shaded areas)
placement on
sides and front
of hearth pan.
53