Unloading An Sd Memory Card - Eclipse AVN827GA Owner's Manual

Before Use
About This Receiver
About SD memory cards
● This unit supports SD memory cards with
capacities from 512 MB to 8 GB.
● SD memory cards that are marked as
follows can be used.
● Multi Media Cards (MMC) cannot be used.
26
26
SD Logo is a trademark of SD-
3C, LLC.
SDHC Logo is a trademark of
SD-3C, LLC.
miniSD Logo is a trademark of
SD-3C, LLC.
miniSDHC Logo is a
trademark of SD-3C, LLC.
microSD Logo is a trademark
of SD-3C, LLC.
microSDHC Logo is a
trademark of SD-3C, LLC.

■ Unloading an SD memory card

IMPORTANT
● When unloading an SD memory card, use
the following notes.
Automatic transmission (AT) car:
If it is difficult to unload an SD memory
card when the shift lever is in the P
position, shift it to the N position. (If your
car has a column shift lever, shift it to the P
or N position.)
Manual transmission (MT) car:
If it is difficult to unload an SD memory
card when the shift lever is in "1", "3", "5" or
"r" position, shift it to the Neutral position.
● Take care NOT to close the display when
the ejected SD memory card remains in
the slot. If this caution is not observed, this
receiver or the disc may be scratched.
● Do not attempt to close the front panel by
hand. Doing so may damage the display.
● Do not put cups, cans, or any other objects
on the display when it is open. Doing so
may damage the display.
● Wipe and clean the display immediately if
juice or other liquid spills onto it. If it is not
cleaned, the display may be damaged.
● To protect the display from heat and dust,
keep the display closed except when you
load or unload an SD memory card.