Listening To The Tuner; Manually Storing Stations Into Memory - Eclipse CD5030 Reference Manual

Hide thumbs Also See for CD5030:
Table of Contents

Advertisement

Available languages

Available languages

Listening to the tuner

1
Press the [SOURCE/PWR] button
for less than one second. Press the
button several times, until the FM/
AM mode is displayed.
How to operate the tuner
English
Automatically storing stations into memory. (The automatic preset mode: ASM)
Press the [▲] button for more than
Press the [▲] button for more than
1
one second, until you hear a beep.
one second, until you hear a beep.
The automatic preset mode starts. "ASM
The automatic preset mode starts. "ASM
ON" will appear on the display, and stations
ON" will appear on the display, and stations
are automatically entered in memory under
are automatically entered in memory under
buttons [1] to [6]. These buttons are called
buttons [1] to [6]. These buttons are called
preset buttons.
preset buttons.

Manually storing stations into memory

Store a station to a preset button.
Press the [
] button or the [
1
button to tune to the station that you
want to store in memory.
Select any button, from [1] to [6], and
2
press it for more than two seconds.
The selected station is now stored in a preset button.
Repeat the above procedure to store additional
stations one at a time in buttons [1] to [6], and
store them in memory.
ATTENTION
Pressing the preset buttons ([1] to [6]) allows you to
make one-touch station selections. The frequency of
the selected station is indicated on the display.
When a new station is set in memory, the station
previously set in memory will be deleted.
If there are fewer than six receivable stations, the
stations set in the remaining buttons will be retained.
CAUTION
If the vehicle's battery is disconnected (for repairs to
the vehicle or for removing the main unit), all stations
in memory will be lost. In such a case, store stations in
the memory again.
]
CAUTION
If the vehicle's battery is disconnected (for repairs to
the vehicle or for removing the main unit), all stations
in memory will be lost. In such a case, store stations in
memory again.
7

Advertisement

Table of Contents
loading

Table of Contents