Eclipse AVN827GA Owner's Manual page 296

Reference
Useful Information
Message
In Voice Control System
Please repeat.
Voice recognition mode has
been cancelled.
That command is not available
at this time.
That command is not available
at this time.
That command is not available
at this time.
That command is not available
at this time.
That frequency is not available.
There is no corresponding data. Displayed when the
That channel cannot be
selected.
The call cannot be placed.
There is no phone number
information.
(Phonebook name) (Location) is
not in the phonebook.
The phonebook is empty.
The call cannot be placed.
There is no phone number
information.
You can't add more digits.
294
294
Cause
Displayed when the voice
command could not be
recognised.
Displayed when the voice
recognition mode is ended.
Displayed when it is not possible
to change the audio mode.
Displayed when it is not possible
to change to the navigation mode.
Displayed when that data does not
exist.
Displayed when the voice
command cannot be used.
Displayed when the connected
device is not a supported product.
Displayed when that frequency is
not available.
corresponding data does not exist.
Displayed when the requested
channel data does not exist.
Displayed when no phone number
data is registered in the
phonebook.
Displayed when the phone
number data is not registered in
the designated location.
Displayed when there is no data
registered in the phonebook.
Displayed when that information
does not exist.
Displayed when the maximum
number of telephone number
digits has been exceeded.
Action
Speak the command again.
-
Check that the disc has been
inserted correctly.
Check that the device has been
connected correctly.
Check that the SD card containing
the map data has been inserted
correctly.
Check that a language other than
Russian is selected for the
language setting.
If the problem is still not resolved,
please contact the nearest dealer.
Use the command only when the
corresponding data exists.
Speak the name of the data again.
Speak a permitted voice
command again.
Use when a supported product is
connected.
Speak the command again.
Use the command only when the
corresponding data exists.
Use the command only when the
channel data exists.
Register in the phonebook before
using.
Register in the phonebook before
using.
Register in the phonebook before
using.
Speak the information again.
Make a call to the entered phone
number or delete digits before
entering.