Table of Contents
Advertisement
Quick Links
For Your Records and
Warranty Assistance
For reference, also attach your receipt or a copy
of your receipt to the manual.
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
Form# 42882-01
20091120
©2009 Hunter Fan Co.
Type 2A Models
Type 2A Models
Type 2A Models
Owner's Guide and Installation Manual
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Hunter 42882-01
Summary of Contents for Hunter 42882-01
- Page 1 For reference, also attach your receipt or a copy of your receipt to the manual. __________________________________________ Model Name __________________________________________ Model No. __________________________________________ Date Purchased __________________________________________ Where Purchased Form# 42882-01 20091120 ©2009 Hunter Fan Co. Type 2A Models Type 2A Models Type 2A Models Owner’s Guide and Installation Manual...
-
Page 2: Table Of Contents
Table Of Contents Preparing the Fan Site . . . . . . . . . . . . . . . . . 3 1 •... -
Page 3: Preparing The Fan Site
If you want to use an existing fan site, complete the following checklist to determine if the site is acceptable and safe for your new Hunter fan. If you cannot check off every item, prepare a new fan site as described on this page. - Page 4 3-1. Attach a 2” x 4” support brace between two joists. Position it to allow you to recess the bottom of the outlet box a minimum of 1/16” into the ceiling. 3-2. Check the support brace to ensure it will support the full weight of the fan and light kit.
- Page 5 To install and use the accessories, follow the instructions included with each product. For quiet and optimum performance of your Hunter fan, use only Hunter speed controls. CAUTION: To reduce the risk of personal injury, attach the fan directly...
-
Page 6: Getting Ready
• Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: •... -
Page 7: Installing The Hanger Bracket
Tighten the screws into the 9/64” pilot holes; do not use lubricants on the screws. Do not over tighten. Flat Washer 42882-01 • 11/20/09 • Hunter Fan Company Hanger Bracket Canopy Screw Isolator 3”... -
Page 8: Assembling And Hanging The Fan
Ground Wire Step 3-3 #8-32 x 1” Screw 42882-01 • 11/20/09 • Hunter Fan Company 3-1. Position the square hanger so that the green ground wire attached to the square faces out of the large opening in the metal bracket. -
Page 9: Wiring The Fan
4-7. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the outlet box. 42882-01 • 11/20/09 • Hunter Fan Company 4 •Wiring the Fan Wire... -
Page 10: Installing The Motor Housing
Rotate the fan housing to situate the screws in the narrow ends of the keyholes. 5-3. Install the two remaining canopy screws into the holes in the fan housing and into the hanger bracket. Securely tighten all screws. -
Page 11: Assembling The Blades
Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan). 6-1. Your fan may include blade grommets. If your fan has grommets, insert them by hand into the holes on the blades. 6-2. Attach each blade to a blade iron using three blade assembly screws. -
Page 12: Multi Staked Light Fixture
Housing Connector Step 7-4 42882-01 • 11/20/09 • Hunter Fan Company WARNING: Use only the light fixture supplied with this fan model. 7-1. To attach the upper switch housing, partially install two #6-32 x 3/8” housing assembly screws into the switch housing mounting plate. - Page 13 Note: In compliance with U.S. Federal energy regulations, this ceiling fan contains a wattage saver that restricts the light kit to a maximum of 190 Watts. Exceeding that limit or the specifications on the light sockets may result in fire hazard or improper operation.
-
Page 14: Fan
8 • Operating and Cleaning Your Ceiling Fan 8-1. Turn on electrical power to the fan. 8-2. The fan pull chain controls power to the fan. The pull chain has four settings in sequence: High, Medium, Low, and Off. • Pull the chain slowly to change settings. -
Page 15: Troubleshooting
6. Check and tighten the screws in the switch housing mounting plate and in the upper and lower switch housing. Problem: Excessive wobbling. 1. If your fan wobbles when operating, use the enclosed balancing kit and instructions to balance the fan. 2. Tighten all blade and/or blade iron screws.
Need help?
Do you have a question about the 42882-01 and is the answer not in the manual?
Questions and answers