Table of Contents
Advertisement
Quick Links
For Your Records and
Warranty Assistance
For reference, also attach your receipt or a copy
of your receipt to the manual.
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
Form# 42823-01
20100217
©2010 Hunter Fan Co.
Type 2A Models
Type 2A Models
Type 2A Models
Owner's Guide and Installation Manual
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Hunter 42823-01
Summary of Contents for Hunter 42823-01
- Page 1 For reference, also attach your receipt or a copy of your receipt to the manual. __________________________________________ Model Name __________________________________________ Model No. __________________________________________ Date Purchased __________________________________________ Where Purchased Form# 42823-01 20100217 ©2010 Hunter Fan Co. Type 2A Models Type 2A Models Type 2A Models Owner’s Guide and Installation Manual...
-
Page 2: Table Of Contents
4 •Wiring the Fan . . . . . . . . . . . . . . . . . . - Page 3 To install and use the accessories, follow the instructions included with each product. For quiet and optimum performance of your Hunter fan, use only Hunter speed controls. CAUTION: To reduce the risk of personal injury, attach the fan directly...
-
Page 4: Getting Ready
• Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: •... -
Page 5: Installing The Hanger Bracket
Tighten the screws into the 9/64” pilot holes; do not use lubricants on the screws. Do not over tighten. Flat Washer 42823-01 • 02/17/10 • Hunter Fan Company Hanger Bracket Canopy Screw Isolator 3”... -
Page 6: Assembling And Hanging The Fan
Ground Wire Step 3-3 #8-32 x 1” Screw 42823-01 • 02/17/10 • Hunter Fan Company 3-1. Position the square hanger so that the green ground wire attached to the square faces out of the large opening in the metal bracket. -
Page 7: Wiring The Fan
• The white (common) power wire from the ceiling to the white wire from the fan • The black power wire from the ceiling to the black wire from the fan • The black/white wire from the fan to the black/white wire from the ceiling. -
Page 8: Installing The Motor Housing
Rotate the fan housing to situate the screws in the narrow ends of the keyholes. 5-3. Install the two remaining canopy screws into the holes in the fan housing and into the hanger bracket. Securely tighten all screws. -
Page 9: Assembling The Blades
Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan). 6-1. Your fan may include blade grommets. If your fan has grommets, insert them by hand into the holes on the blades. 6-2. Attach each blade to a blade iron using three blade assembly screws. -
Page 10: Completing Your Installation With A Bowl Light Fixture
7 • Completing Your Installation With a Bowl Light Fixture Your Hunter fan comes with an integrated light fixture assembly. WARNING: Use only the light fixture supplied with this fan model. 7-1. To attach the upper switch housing, partially install two housing assembly screws into the switch housing mounting plate. -
Page 11: Completing Your Installation With A
Align the side screw holes in the upper and lower switch housings. Attach the lower switch housing to the upper switch housing with three housing assembly screws. 42823-01 • 02/17/10 • Hunter Fan Company Steps 7-5 – 7-6 Lower Switch... - Page 12 7-7. First install B10 candelabra bulbs (60 Watt Maximum) into the sockets. 7-8. Thread the light and fan pull chains through the hole in the center of the glass bowl. Then, thread the light pull chain through the hole in the center of the cover plate.
-
Page 13: Fan
8 • Operating and Cleaning Your Ceiling Fan 8-1. Turn on electrical power to the fan. 8-2. The fan pull chain controls power to the fan. The pull chain has four settings in sequence: High, Medium, Low and Off. • Pull the chain slowly to change settings. -
Page 14: Troubleshooting
Problem: Lights dim when turned on or do not turn on 1. Check to make sure wattage of light bulbs installed match the specifications on the light socket. 42823-01 • 02/17/10 • Hunter Fan Company 9 • Troubleshooting If you need parts or service assistance, please call 888-830-1326 or visit us at our Web site at http://www.hunterfan.com.
Need help?
Do you have a question about the 42823-01 and is the answer not in the manual?
Questions and answers