Hunter Type 2A Owner's Manual And Installation Manual
Hide thumbs
Also See for Type 2A:
- Owner's manual and installation manual (18 pages) ,
- Owner's manual (14 pages) ,
- Installation and operation manual (9 pages)
Table of Contents
Advertisement
Quick Links
For Your Records and
Warranty Assistance
For reference, also attach your receipt or a copy
of your receipt to the manual.
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
42212-01
20111115
©2011 Hunter Fan Co.
Type 2A Models
Type 2A Models
Type 2A Models
Owner's Guide and Installation Manual
Advertisement
Table of Contents
Related Manuals for Hunter Type 2A
Summary of Contents for Hunter Type 2A
- Page 1 Type 2A Models Type 2A Models Type 2A Models For Your Records and Warranty Assistance For reference, also attach your receipt or a copy of your receipt to the manual. Owner’s Guide and Installation Manual __________________________________________ Model Name __________________________________________ Model No.
-
Page 2: Table Of Contents
Welcome Your new Hunter ceiling fan is an addition to your home or office that will provide comfort and performance for many years. This installation and operation manual gives you complete instructions for installing and operating your fan. We are proud of our work. We appreciate the opportunity to supply you with the best ceiling fan available anywhere in the world. - Page 3 If you want to use an existing fan site, complete the following checklist System to determine if the site is acceptable and safe for your new Hunter fan. If you cannot check off every item, prepare a new fan site as described on this page.
- Page 4 Section 2 • Installing the electrical codes and ANSI/NFPA 70. If Ceiling Plate. you are unfamiliar with wiring, use a qualified electrician. 42212-01 • 11/15/11 • Hunter Fan Company...
- Page 5 Mounting and Optional Accessories Understanding Mounting Support Brace Hunter’s patented mounting system provides you maximum ease in installing your fan. This fan was designed to be mounted only on flat ceilings and cannot be used on ceilings less than 8 feet high.
-
Page 6: Getting Ready
Check for any shipping damage to the motor or fan blades. If any parts are missing or damaged, contact your Hunter dealer or call Hunter Technical Support Department at 888-830-1326 (In Canada, call 866-268-1936). 42212-01 • 11/15/11 • Hunter Fan Company... -
Page 7: Installing The Hanger Bracket
Tighten the screws into the 9/64” pilot holes; do not use lubricants on the screws. Do not over tighten. Flat Washer 3” Wood Screw Steps 2-4 – 2-6 42212-01 • 11/15/11 • Hunter Fan Company... -
Page 8: Assembling And Hanging The Fan
3-3. Install two locking screws through the holes in the side of the Hanger metal bracket to secure the square hanger. Motor Green Assembly Ground Wire Step 3-2 Green Ground Wire Step 3-3 #8-32 x 1” Screw Locking Screw 42212-01 • 11/15/11 • Hunter Fan Company... -
Page 9: Qualified Electrician
4-7. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the outlet box. 42212-01 • 11/15/11 • Hunter Fan Company... -
Page 10: Installing The Motor Housing
Fan Housing 5-3. Install the two remaining canopy screws into the holes in the fan housing and into the hanger bracket. Securely tighten all screws. Step 5-3 Canopy Screw 42212-01 • 11/15/11 • Hunter Fan Company... -
Page 11: Assembling The Blades
6 • Assembling the Blades Hunter fans use several styles of fan blade irons (brackets that hold the Step 6-1 (Detail) blade to the fan). 6-1. Your fan may include blade grommets. If your fan has grommets, insert them by hand into the holes on the blades. -
Page 12: Completing Your Installation With A Multi Staked Light Fixture
Align the side screw holes in the upper and lower switch housings. Attach the lower switch housing to the upper switch Lower housing with three #6-32 x 3/8” housing assembly screws. Switch Housing Housing Step 7-4 Assembly Screw Plug Connector Detail 42212-01 • 11/15/11 • Hunter Fan Company... - Page 13 7-7. Install the socket rings into the light sockets. Twist them into place with the socket ring glass tool. Socket Ring 7-8. Install B10 candelabra-based light bulbs (60 Watt maximum each). Bulb Socket Ring Glass Tool Steps 7-7 – 7-8 42212-01 • 11/07/11 • Hunter Fan Company...
-
Page 14: Operating And Cleaning Your Ceiling Fan
8-5. The blades on this fan have been treated with Hunter’s Dust Armor ® protection, making the blades less likely to attract dust and dirt. Use a dry or slightly damp lint free cloth to clean the blades. -
Page 15: Troubleshooting
If you need parts or service assistance, please call 888-830-1326 (In Canada, call 866-268-1936) or visit us at our website at http://www.HunterFan.com. Hunter Fan Company 7130 Goodlett Farms Parkway #400 Memphis, Tennessee 38016 42212-01 • 11/15/11 • Hunter Fan Company...
Need help?
Do you have a question about the Type 2A and is the answer not in the manual?
Questions and answers