Omron Powli BU50SW Instruction Manual page 46

Do not put the battery into fi re and do not break it.
● The battery may explode or leak dilute sulfuric acid.
Do not use a new battery and an old battery at the same time.
● Dilute sulfuric acid may leak.
● A battery can present a risk of electrical shock and high short circuit current.The following
precautions should be observed when working on batteries:
1) Remove watches, rings, or other metal objects from the hands.
2) Use tools with insulated handles.
3) Wear rubber gloves and boots.
4) Do not lay tools or metal parts on top of batteries.
5) Disconnect charging source prior to connecting or disconnecting batteries terminals.
● Servicing of batteries should be performed or supervised by personnel knowledgeable of
batteries and the required precautions. Keep unauthorized personnel away from batteries.
Battery recycling
The unit uses lead acid batteries, which are a valuable recyclable resource. Please recycle.
For information on recycling, please contact our Electronic Systems & Equipments repair
center.
■ Procedure for recycling the battery
1.
Use a screwdriver to loosen (turn clockwise) the 2 screws at the top of the front panel of the unit, until
they turn freely. (The screws cannot be removed from the front panel.)
Pull the front panel towards you to remove it.
Loosen the
➀
2 screws.
2.
Remove the battery connector from the plate cover
Battery connector
Plate cover
50 75
BU SW / BU
Caution
(for battery replacement)
Notes
➁
➀
and disconnect the connector.
100
SW / BU SW / BU
➀
➁
Disconnect by holding here.
150
SW
1
2
3
4
5
Pb
6
7
8
9
1 0
33