Microtek ArtixScan DI 2125c User Manual page 43

7. The scanner cannot pick up papers into the feeder.
Make sure the sheets of papers loaded on the Document Feed Tray do not
exceed the thickness limit. The thickness limit is 2 mm.
Check if the Separation Roller Assembly becomes worn and needs to be
changed.
8. When trying to scan, an error message appears on your screen that reads,
"Code -206, ADF paper jam or roller failure."
Click OK first; then open the scanner cover, as illustrated in the pervious
section "Fixing Paper Jams".
• If the problem is occurring from a paper jam, follow the procedures laid
out in the "Fixing Paper Jams" section.
• If the problem is occurring from situations other than a paper jam, follow
the procedures laid out in the "Position Documents" section.
Finally, close the scanner cover and restart scanning.
ArtixScan DI 2125c User's Manual 43