Microtek ArtixScan DI 2125c User Manual page 21

Scanning
settings
Image type
Image
correction
settings
For preview purposes only, take note of the additional notes below:
1. Load a piece of paper from the paper stack into the Document Feed Tray as step 1. Do not
load more than one sheet, as a single sheet is sufficient for previewing.
2. After finishing step 4 and before proceeding to step 5, click the Preview button to perform a
preliminary view of the entire image. When done, a preview image appears in the preview
window.
At this moment, the previewed page is delivered to the output tray from the Document Feed tray.
Load the previewed page, along with the paper stack into Document Feed Tray. You are now
ready to scan.
For preview
purposes only
ArtixScan DI 2125c User's Manual
Scan frame
(enclosed by dotted
lines and labeled with
the tag "Main")
Preview image (the
enclosed frame
bordered in red)
Preview window
21