Online Interface Installation; Conveyor Installation - Paitec MX-6000 User Manual

1-7 Inline Interface Installation
Picture A
Picture B
Inline Set Up Mode Installation
By pressing set-up button for three seconds, users can change the inline mode to users'
environment.
1. Inline select mode : Users are able to use printer inline button in operation panel when inline
2. Inline lct cov mode : In the inline mode, it ables to recognize whether feeding unit safety
3. Initialize : It makes the machine to be initialized to set-up condition when fi rst delivered from
a warehouse. (Factory default)

1-8 Conveyor Installation

Please refer to page 28 for proper conveyor installation.
1. Please prepare enclosed inline interface
2. Remove a tray guide if it is set up.
3. Install like the left pictures after moving the
4. Install a guide clip like picture B.
5. Change to inline mode by using 'machine
mode is on.
cover is opened, closed or ignore it so it is possible to set up for users'
environment. (This function is needed when printing security
documents.)
guide and a guide clip.
tray down and fi x it by using two fi xing
screws.
set up mode'. (Please see below)
- 5 -
MX-6000 User Manual