Paitec MX-9000 User Manual
  1. Manuals
  2. Brands
  3. Paitec Manuals
  4. Food Saver
  5. MX-9000
  6. User manual

Paitec MX-9000 User Manual

Pressure sealer
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
MX-9000 User Manual
Model MX-9000
User Manual
Rev. 070119

Advertisement

Table of Contents
loading

Related Manuals for Paitec MX-9000

Summary of Contents for Paitec MX-9000

  • Page 1 MX-9000 User Manual Model MX-9000 User Manual Rev. 070119...
  • Page 2 MX-9000 User Manual Greeting Thank you for purchasing PAITEC USA products. This manual is prepared to provide guidelines on how to properly operate and maintain MX9000 Copyright Any of the contents should not be copied, re-printed or translated by other languages without PAITEC USA approval.

  • Page 3: Table Of Contents

    MX-9000 User Manual Table of Contents Chapter 1 - Installation 1-1 Installation Environment 1-2 Unpacking 1-3 Removing Safety Tapes and Styrofoam 1-4 Power Connection 1-5 Power Fan Installation 1-6 Tray Guide Installation 1-7 Online Interface Installation 1-8 Conveyor Installation Chapter 2 - Before Operating...

  • Page 4: Chapter 1 - Installation

    MX-9000 User Manual Chapter 1 - Installation 1-1 Installation Environment 1. Input power: 110V (Max 5A) 2. Machine size (mm): 17" x 24" x 15" (without conveyor) 3. Machine weight: 143 lbs. - Since the weight of a product is heavy, please use appropriate table for putting it on.

  • Page 5: Power Connection

    MX-9000 User Manual 1-4 Power Connection Please refer to the label for electric information which is located at the back side of the machine. When the power cable is properly connected, please switch the machine on and check whether ‘Ready’ sign is displayed on the display panel. If not, please contact your local dealer for service.

  • Page 6: Online Interface Installation

    MX-9000 User Manual 1-7 Inline Interface Installation 1. Please prepare enclosed inline interface guide and a guide clip. 2. Remove a tray guide if it is set up. 3. Install like the left pictures after moving the tray down and fix it by using two fixing Picture A screws.

  • Page 7: Chapter 2 - Before Operating

    MX-9000 User Manual Chapter 2 - Before Operating 2-1 Identifying Parts and Functions 1. Feeding Unit Safety Cover 2. Upper Fold Cassette Safety Cover 3. Large Capacity Tray 4. Lower Fold Cassette 5. Conveyor 6. Control Panel 7. Jam Removal Handle 8.
  • Page 8 MX-9000 User Manual Large Capacity Tray 1. Tray Guide 2. Feed Guide (Left) 3. Feed Guide (Right) 4. Locking Knob 5. Infeed Roller 6. Tray Level Sensor Lower Cassette 1. Lower Cassette 2. Stopper 3. Stopper Adjustment Knob 4. Folding Scale Label Upper Cassette 5.
  • Page 9 MX-9000 User Manual Exit Side 1. Press Rollers 2. Conveyor Wheel Holder 3. Power Switch 4. Conveyor Shaft 5. Main Power Socket 6. Conveyor Power Socket 7. Manual Feed Button 8. Fuse Socket 9. Lower Press Roller Cover 10. Upper Press Roller Cover 11.
  • Page 10 MX-9000 User Manual Name and Function of Each Button - 9 -...
  • Page 11 MX-9000 User Manual 1. Mode - Displays current status of the machine. 2. Speed - Displays the machine’s current set speed. 3. ( - ) Button - Decreases the speed or value. 4. Printer Inline Button - Changes to online/offline mode. (operable only at online mode) 5.
  • Page 12 MX-9000 User Manual 8. Auto Start Button - You can choose to separate your job by using the ‘Auto Start’ function. You can simply set your desired volume per run and the time interval in between run. For example, if you set the counter at 50 and auto start at 5 seconds, the machine will run 50 forms and stops for five seconds until it starts again to process 50 forms and so on.

  • Page 13: Chapter 3 - Preparing For Operation

    MX-9000 User Manual Chapter 3 - Preparing for operation 3-1 Paper Size MX9000 will not handle any form that is larger or smaller than the following forms. Reference - Using forms that do not fall under the specified size may result in paper jam or machine damage.
  • Page 14 MX-9000 User Manual 2. Open the safety cover of the feeding unit. The tray will go down. 3. When the feed tray is down to the bottom, loosen the green knobs on both paper guides. 4. Load the aligned forms onto the feed tray and adjust the paper guides so they are gently covering the sides of the stacked forms.

  • Page 15: Fold Setting

    MX-9000 User Manual 3-3 Fold Setting The following instruction shows how to set 8 1/2 X 11 sizes Z-Fold. 1. Lower Cassette Fold Setting - 93mm 1. Unlock the fold position of the lower cassette by turning the stopper locking knob counter clockwise.
  • Page 16 MX-9000 User Manual Understanding Folding Mechanism It is important to understand how MX-9000 folds paper in order to accurately set the fold setting. Please read the following information carefully to fully understand the folding mechanism of MX-6000. 1. The folding unit is composed of rollers, cassettes and stoppers.
  • Page 17 MX-9000 User Manual 4. The form hits the lower cassette stopper and forms a buckle. The folded form then enters in between the two outer rollers. 5. The folded form then exits the fold rollers and then are sent to the press unit.
  • Page 18 MX-9000 User Manual Z-Fold Setting Upper Cassette Paper Infeed Direction Outfeed Direction Stopper Lower Cassette Second Fold First Fold (Lower Cassette) (Upper Cassette) Infeed Direction When setting a Z-Fold, please read the following steps. 1. Measure the length from line 1 to line 2 of the form as indicated in the image above.
  • Page 19 MX-9000 User Manual V-Fold Setting V-Fold Guide First Fold (Upper Cassette) Infeed Direction When setting a V or a Single-Fold, please read the following steps. 1. Measure the length from line 1 to line 2 of the form as indicated in the image above.
  • Page 20 MX-9000 User Manual C-Fold Setting Second Fold (Lower Cassette) First Fold (Upper Cassette) Infeed Direction When setting a C-Fold, please read the following steps. 1. Measure the length from line 1 to line 3 of the form as indicated in the image above.
  • Page 21 MX-9000 User Manual Double Folding Second Fold (Lower Cassette) First Fold (Upper Cassette) Infeed Direction When setting a Double-Fold, please read the following steps. 1. Measure the length from line 1 to line 3 of the form as indicated in the image above.
  • Page 22 MX-9000 User Manual Window Folding Second Fold (Lower Cassette) First Fold (Upper Cassette) Infeed Direction When setting a Window-Fold, please read the following steps. 1. Measure the length from line 1 to line 4 of the form as indicated in the image above.

  • Page 23: Fine Adjustment Of Folding Position

    MX-9000 User Manual 3-4 Fine Adjustment of Folding Position You can adjust the fold setting in the following cases. 1. Fine adjustment is required from the standard folding type. 2. In case the folding is slightly different. Reference If the folding is slightly off from the desired position, please check the following possible causes.

  • Page 24: Chapter 4 - Handling Errors

    Chapter 4 - Handling Errors 4-1 Error Message There are various types of sensors located at different parts of MX-9000. These sensors detect and display the location of an error on the panel. Please read the following errors to understand how to handle each error.

  • Page 25: Handling Paper Jams

    MX-9000 User Manual 4-2 Handling paper jams Removing the jammed paper at the upper cassette 1. Open the top upper cassette safety cover. 2. Pull out the upper cassette and remove any jammed paper. Caution Please be cautious when removing jammed forms as it may result in damaging the upper cassette.

  • Page 26: Chapter 5 - Maintenance

    MX-9000 User Manual Chapter 5 - Maintenance 5-1 Replace Feed Roller (set of three) The feeding rollers consist of three different rollers; 1. Pick up roller 2. Feed roller 3. Separate roller There is no certain life cycle for these rollers since it may vary depending on different environment, forms, and etc.

  • Page 27: Cleaning Rollers

    MX-9000 User Manual 5-2 Cleaning Rollers Since Pressure seal forms leave paper dust, ink and toner residues, it is very important to occasionally clean the surface of the each roller to maintain its best condition for better performance. 1. Paper dust - Use small air cleaner or dust remover.

  • Page 28: Chapter 6 - Troubleshooting

    MX-9000 User Manual Chapter 6 - Troubleshooting Some of the errors can easily be fixed by the user without a professional’s aid. 6-1 No Power 1. Check whether the power cable is properly connected. 2. Check the power supply. 6-2 Incorrect Folding 1.

  • Page 29: Chapter 7 - Conveyor

    MX-9000 User Manual Chapter 7 - Conveyor (Optional) 7-1 Conveyor Installation Please attach the tray to Please loosen the screws Please attach the lower the main body of the and attach the side guide bracket like the picture. conveyor like the picture.
  • Page 30 This page intentionally left blank Headquarters & Factory 15951 SW 41st Street Suite 400 Davie, FL 33331 E-mail paitec@paitec.com Website: www.paitec.com -29-...
  • Page 31 Fold Settings ES5000 - IM4000 - IM9500 ES2000 – ES9000 – MX9000 – MX13000 Drum First Second First Second inches inches inches inches Size and Fold Type 11” Z-Fold 7-1/3 3-2/3 3-2/3 3-2/3 14” Z-Fold 9-1/3 4-2/3 4-2/3 4-2/3 14” EZ-Fold * 8-3/4 5-1/4 5-1/4...
  • Page 32 ES2000 Folding Diagram ES8000 MX9000 MX13000 In-feed direction Z-Fold Out-feed In-feed direction C-Fold Out-feed In-feed direction V-Fold Out-feed Insert Folder Symmetrical Fold 1st Fold 2nd Fold Guide Z-Fold V-Fold None C-Fold Double Parallel Fold Plates 1st Fold 2nd Fold 80 mm 70 mm Minimum 3.15 in...

Table of Contents