Table of Contents
Advertisement
1-7 Inline Interface Installation
Picture A
Picture B
Inline Set Up Mode Installation
By pressing set-up button for three seconds, users can access into setup program mode
1. Inline select mode: Users are able to use printer inline button in operation panel when inline
2. Inline LCT cover mode: In the inline mode, it able to recognize whether feeding unit safety
3. Initialize: It makes the machine to be initialized to set-up condition when first delivered from
a warehouse. (Factory default)
1-8 Conveyor Installation
Please refer to page 28 for proper conveyor installation.
1. Please prepare enclosed inline interface
2. Remove a tray guide if it is set up.
3. Install like the left pictures after moving the
4. Install a guide clip like picture B.
5. Change to inline mode by using 'machine
(Optional)
mode is on.
cover is opened, closed or ignore it so it is possible to set up for users'
environment. (This function is needed when printing security
documents.)
guide and a guide clip.
tray down and fix it by using two fixing
screws.
set up mode'. (Please see below)
- 5 -
MX-13000 User Manual
Advertisement
Table of Contents
