Fine Adjustment Of Folding Position; Conveyor Wheel Setup - Paitec MX-6000 User Manual

3-4 Fine Adjustment of Folding Position

You can adjust the fold setting in the following cases.
1. Fine adjustment is required from the standard folding type.
2. In case the folding is slightly different.
Reference
If the folding is slightly off from the desired position, please check the
following possible causes.
a. Incorrect fold setting
b. Machine clearance
c. Incorrect position of fold cassettes
d. The FRR or the fold rollers are worn out

3-5 Conveyor Wheel Setup

The conveyor wheel can be adjusted to accomodate different forms with different
lengths. Please refer to the following pictures to correctly set the wheels to
accomodate your form lengths.
Good
- 22 -
MX-6000 User Manual
Bad