Table of Contents
Advertisement
Chapter 5 - Maintenance
5-1 Exchanging Friction Reverse Roller
The feeding rollers consist of three different rollers;
1. Pick up roller
2. Feed roller
3. Separate roller
There is no certain life cycle for these rollers since it may vary depending on different
environment, forms, and etc. Read the follwing instructions on how to replace these
rollers.
1. Remove the snap ring (white clip).
2. Replace the roller and place back the snap ring.
3. Follow step 1 & 2 for the rest of the rollers.
Feed roller
Pick-up roller
Separate roller
(below feed roller)
- 25 -
MX-6000 User Manual
Advertisement
Table of Contents
