Chapter 5 - Maintenance - Paitec MX-13000 User Manual

Chapter 5 - Maintenance

5-1 Replace Feed Roller (set of three)
The feeding rollers consist of three different rollers;
1. Pick up roller
2. Feed roller
3. Separate roller
There is no certain life cycle for these rollers since it may vary depending on different
environment, forms, and etc. Read the following instructions on how to replace these
rollers.
1. Remove the snap ring (white clip).
2. Replace the roller and place back the snap ring.
3. Follow step 1 & 2 for the rest of the rollers.
Feed roller
Pick-up roller
Separate roller
(Below feed roller)
- 25 -
MX-13000 User Manual