Fine Adjustment Of Folding Position; Conveyor Wheel Setup - Paitec MX-9000 User Manual

3-4 Fine Adjustment of Folding Position

You can adjust the fold setting in the following cases.
1. Fine adjustment is required from the standard folding type.
2. In case the folding is slightly different.
Reference
If the folding is slightly off from the desired position, please check the
following possible causes.
a. Incorrect fold setting
b. Machine clearance
c. Incorrect position of fold cassettes
d. The FRR or the fold rollers are worn out

3-5 Conveyor Wheel Setup

The conveyor wheel can be adjusted to accommodate different forms with
different lengths. Please refer to the following pictures to correctly set the wheels
to accommodate your form lengths.
Good
- 22 -
MX-9000 User Manual
Bad