Sonar Le Installation; Configuring Sonar Le With Zed-R - ALLEN & HEATH ZED R16 Firewire User Manual

System Requirements (For SONAR LE)
(For running SONAR LE on a Windows computer. The system requirements for connecting to ZED-R16 are docu-
mented separately)
System Require-
ments
Operating System
Processor Speed
RAM
Graphics (resolution,
color depth)
Hard Disk Space
Hard Disk Type
MIDI Interface
Audio Interface
Optical Drive

SONAR LE Installation.

Put disk into CD or DVD ROM drive and follow instructions on screen.
SONAR LE Audio Configuration with ZED-R16.
To configure your SONAR LE software to communicate
audio to and from your ZED-R16 mixing console, follow the
sequence below.
Ensure the Driver software is installed on your computer.
Please refer to the section titled Installing Drivers.
Ensure the ZED-R16 is powered on.
Connect the FireWire lead from the computer to either
FireWire port on ZED-R16.
First check that your computer has recognised
the connection of the ZED-R FireWire device by clicking
Settings/Control Panel/Sounds and Audio Devices/Audio.
ZED R Audio should appear as an option in the drop-down
menu for Sound playback devices as shown on the right:
It is also a good idea to select "No Sounds" in the
Sounds window so you don't get the Windows beeps etc.
through your monitors.
Allen & Heath
Minimum
Windows XP
Intel® Pentium® 4 1.3 GHz,
or AMD™ Athlon XP 1500+
or higher
256 MB
1024 x 768, 16-bit colour
100 MB for core program
Any
Windows-compatible
Windows-compatible
DVD-ROM, DVD+/-R, or DVD+/-RW for installation, CD-R or CD-
RW capability required for CD audio disc burning
Recommended
Windows XP/Vista/Vista x64
Intel® Pentium® 4 2.8 GHz
[EM64T], or AMD™ Athlon 64
2800+or higher
1 GB or higher
1280 x 960, 32-bit colour
2 GB for program and content
EIDE/Ultra DMA (7200 RPM) or
Windows-compatible
WDM- or ASIO-compatible, includ-
ing WaveRT for Vista
43
SATA
ZED-R16 User Guide