Digital I/O Configuration Diagrams - ALLEN & HEATH ZED R16 Firewire User Manual

DIGITAL INPUT & OUTPUT CONFIGURATIONS
DIGITAL I/O CONFIGURATIONS:
The following four set-up configuration diagrams show a schematic representation of the ZED-R16 digital I/O section
connected to the recording/playback equipment. Note the FireWire channel differences at higher sample rate settings.
1 FireWire mode 44.1 or 48kHz
MONO CHANNELS 1 -16 ANALOGUE I/O
1-8 9-16 1-8
A-D A-D D-A
1-8 9-16 1-8 9-16
ADAT OUT ADAT IN
2 FireWire mode 88.2 or 96kHz
MONO CHANNELS 1 -16 ANALOGUE I/O
1-8 9-16 1-8
A-D A-D D-A
1-8 9-16 1-8 9-16
ADAT OUT ADAT IN
3 ADAT mode 44.1 or 48kHz
MONO CHANNELS 1 -16 ANALOGUE I/O
1-8 9-16 1-8
A-D A-D D-A
1-8 9-16 1-8 9-16
ADAT OUT ADAT IN
4 ADAT mode 44.1 or 48kHz
FireWire used to control sync source
MONO CHANNELS 1 -16 ANALOGUE I/O
1-8 9-16 1-8
A-D A-D D-A
9-16 9-16
1-8 1-8
ADAT OUT ADAT IN
Allen & Heath
STEREO MASTER
9-16 17-18 17-18
FIREWIRE
ADAT
D-A CODEC
FIREWIRE
STREAMING
CONTROLLER
SAMPLE RATES 44.1 & 48kHz
STEREO MASTER
9-16 17-18 17-18
FIREWIRE
ADAT
D-A
CODEC
FIREWIRE
STREAMING
CONTROLLER
SAMPLE RATEs 88.2 & 96kHz
STEREO MASTER
9-16 17-18 17-18
FIREWIRE
ADAT
D-A CODEC
FIREWIRE
STREAMING
CONTROLLER
SYNC CONTROL
SAMPLE RATE 44.1 or 48kHz
INTERNAL SYNC
STEREO MASTER
9-16 17-18 17-18
FIREWIRE
ADAT
D-A CODEC
FIREWIRE
STREAMING
CONTROLLER
SYNC CONTROL
SAMPLE RATE 44.1 or 48kHz
SYNC EITHER INTERNAL OR ADAT IN
DEVICE CHANNELS 1-16 = MIXER CH 1-16
DEVICE CHANNELS 17-18 = MIXER DIG L-R
DEVICE CHANNELS 19-26 = ADAT 1-8
(ADAT CHANNELS ACCESSED VIA DAW)
COMPUTER USED TO SWITCH CLOCK SYNC SOURCE
25
DAW
DAW
DEVICE CHANNELS 1-16 = MIXER CH 1-16
ADAT RECORDER
ADAT RECORDER
ZED-R16 User Guide