Sonar Le Installation; Configuring Sonar Le With Zed - ALLEN & HEATH ZED 420 User Manual

System Requirements.
System Require-
ments
Operating System
Processor Speed
RAM
Graphics (resolution,
color depth)
Hard Disk Space
Hard Disk Type
MIDI Interface
Audio Interface
Optical Drive

SONAR LE Installation.

Put disk into CD or DVD ROM drive and follow instructions on screen!
SONAR LE Audio Configuration with ZED.
To configure your SONAR LE software to communicate audio to and from your ZED mixing console, follow the se-
quence below.
Ensure the ZED mixing console is powered on.
Connect the USB lead from the computer to the USB port on ZED.
First check that your computer has recognised
the connection of the ZED USB device by clicking
Settings/Control Panel/Sounds and Audio Devices.
The device name should be USB Audio CODEC
(ensure there are no other external audio devices
attached to the computer).
Also ensure the Device Volume is set to High.
This can default to the middle during connection
which means very low volume from the USB device, so
it's worth checking the first few times you connect.
The properties window should look like this:
It is also a good idea to select "No Sounds" in the
Sounds window.
Allen & Heath
Minimum
Windows XP
Intel® Pentium® 4 1.3 GHz,
or AMD™ Athlon XP 1500+
or higher
256 MB
1024 x 768, 16-bit color
100 MB for core program
Any
Windows-compatible
Windows-compatible
DVD-ROM, DVD+/-R, or DVD+/-RW for installation, CD-R or CD-
RW capability required for CD audio disc burning
29
Recommended
Windows XP/Vista/Vista x64
Intel® Pentium® 4 2.8 GHz
[EM64T], or AMD™ Athlon 64
2800+or higher
1 GB or higher
1280 x 960, 32-bit color
2 GB for program and content
EIDE/Ultra DMA (7200 RPM) or
SATA
Windows-compatible
WDM- or ASIO-compatible, includ-
ing WaveRT for Vista
ZED-4 BUS User Guide