Studio Outputs & St3 & 4 Inputs - ALLEN & HEATH ZED R16 Firewire User Manual

STUDIO OUTPUTS & ST3 & 4 INPUTS
STUDIO OUT 1
L
R
ST3 L ST4 L
ST3 R ST4 R
ST3
-5
-10
LEV
0
-20
9
5
-30
10
O O
PFL
L-R
MIX L-R
AUX 1
10
AUX 2
AUX 3
AUX 4
-5
LEV
-10
0
-20
11
5
-30
10
O O
12
AFL
1
STUDIO
STUDIO MONITOR FEEDS
Allen & Heath
STUDIO OUT 2
9
L
R
10
11
ST4
-5
-10
LEV
0
-20
5
-30
12
10
O O
PFL
L-R
MIX L-R
AUX 1
AUX 2
AUX 3
AUX 4
-5
LEV
-10
0
-20
5
-30
10
O O
AFL
2
STUDIO
ST3 & 4 Inputs
These stereo inputs have limited features and are provided for
additional stereo sources that need to be added to the main L-R
mix. The left input jack socket normalises or connects through
the break contacts of the right input jack socket, enabling a mono
input to be fed to both left and right mix paths.
Studio Monitor Outputs
The Studio Outputs allow a selection of signals to be sent as out-
puts for artists monitors.
The selection switches enable the main L-R mix (post fader) and
auxes 1 to 4 (post master level) to the studio outputs. If more
than one switch is pressed the signals mix together.
Studio Monitor Level control
The level control adjusts the output level of the Studio Outputs
from off (fully attenuated) to +10dB maximum.
Studio Monitor AFL
The After Fade Listen switch sends the post level control Studio
Output signals to the PFL/AFL monitoring system allowing them
to be checked in the engineers headphones and control room
monitor speakers.
20 ZED-R16 User Guide