Section 2-Assembly; Assembling The Patient Lift; Assembling The Mast Assembly To The Base; Assembling The Knee Pad To The Mast Assembly - Invacare Roze User Manual

Stand up patient lift
Hide thumbs Also See for Roze:
Table of Contents

Advertisement

SECTION 2—ASSEMBLY

Assembling the Patient Lift

Assembling the Mast Assembly to the Base

NOTE: The mast assembly may be removed from the base for storage 
or transporting. The mast assembly MUST be properly secured to 
the base assembly before use.
NOTE: For this procedure, refer to FIGURE 2.1.
1.
Put the base on a level surface so all casters make contact 
with the floor.
2.
Lock the rear casters (Detail "A").
3.
Unscrew the top knob and remove it from the base.
4.
Loosen the bottom knob, but leave it screwed into the 
base.
5.
Put the tube of the mast assembly into the hole in the base.
6.
While supporting the mast assembly, tighten the bottom 
plastic knob.
7.
Screw the top plastic knob into the hole in the base.

Assembling the Knee Pad to the Mast Assembly

NOTE: For this procedure, refer to FIGURE 2.2.
NOTE: The knee pad may be removed from the patient lift for 
storage or transporting. The knee pad MUST be properly secured to 
the mast assembly before use.
1.
Push the knee pad down into position on the knee pad 
mounting bracket on the mast assembly.
2.
Put the fix block in place on the knee pad mounting 
bracket.
3.
Insert the quick release knob through the mounting 
bracket, kneed pad and fix block.
4.
Tighten the quick release knob.

Assembling the Foot Plate to the Mast Assembly

NOTE: For this procedure, refer to FIGURE 2.3.
1.
Rotate the foot plate up and place the hooks on the foot plate 
onto the top mounting bolts in the mast assembly.
2.
Rotate the foot plate down towards the mast assembly. The 
bottom of the foot plate will rest against the bottom bolts on 
the mast assembly. 
3.
Ensure that the foot plate is level and secure.
Part No. 1155394
DETAIL "A"
Push tab down
to LOCK.
Push tab UP
to UNLOCK.
FIGURE 2.1 Assembling the Mast Assembly to the Base
FIGURE 2.2 Assembling the Knee Pad to the Mast Assembly
Mast Assembly
Top Mounting
Bolt
Bottom Mounting Bolt
FIGURE 2.3 Assembling the Foot Plate to the Mast Assembly
11
SECTION 2—ASSEMBLY
Mast Assembly
Base
Bottom Knob
Caster
Quick Release Knob
Knee Pad
Foot Rest
(shown in place)
Roze™ Stand Up Patient Lift
Top Knob
Fix Block

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents