Copying Or Deleting Compactflash Card Files Over The Network - Epson EMP-1825 Operation Manual

Files that can be Projected Using PC Free, and Saving
Copying or Deleting CompactFlash Card Files over
the Network
You can copy and delete files on a CompactFlash card inserted in the
projector from your computer over the network. This is useful since it lets
you operate a CompactFlash card without removing it from the projector
even if the projector is mounted on the ceiling or in a remote location.
You can operate one projector with one computer. You cannot copy or
delete files on a USB storage device.
If the write protection switch on the CompactFlash card is
q
set to read-only, you cannot copy or delete files. In this case,
release write protection.
Procedure
To perform file operations on a CompactFlash card, make sure the
EasyMP standby screen (s p.53) is displayed.
For Windows
A
On your computer, go to "My Computer" and then
open "Map Network Drive".
B
For "Drive", enter a drive name that is not being
used. For "Folder", enter \\Projector IP
address\share, then click "Finish".
The share folder is displayed.
C
When the Share folder is double-clicked, the
following screen is displayed. When "network drive
password" is set in the "Network" menu from the
projector's configuration menu, enter the "User
name" and "Password", and then click "OK". Enter
"EPSONDRV" as the "User name".
50