Name Of Each Section - Hitachi Kokusai Electric KP-M1A Operation Manual

4. Name of each section

(1) VIDEO OUT (BNC) connector
A composite video signal (VS) is fed from this connector. Connect a 75-ohm coaxial cable
between the connector and a video monitor or other video equipment.
(2) Shutter speed select switch
Use this switch to set the shutter speed.
(3) DC IN/SYNC connector
This connector is for 12V DC input, a composite video signal (VS) output and an external sync
signal input.
(4) FIELD/FRAME integration select switch
Use this switch to select an integration mode. This switch is set to FRAME at factory.
(5) SHUTTER ON/OFF switch
Set the SHUTTER ON/OFF switch to ON to establish the shutter mode.
KP-M1A
(1) (2)
(4)
(3)
(5)
- 6 -