SOYO SY-6IBM User Manual page 63

BIOS Setup Utility
3-8.5 Onboard Parallel Ports
Onboard Parallel
Ports
Parallel Port Mode
If [Parallel Port Mode] is set to [ECP] mode
ECP Mode use
DMA
If [Parallel Port Mode] is set to [EPP] mode
EPP Mode Select
PWRON After
PWR-Fail
Setting Description
ECP/EPP The mode depends on your
external device that
SPP
connects to this port.
ECP
EPP/SPP
3 Choose DMA3
1 Choose DMA1
EPP 1.9 Select EPP port type 1.9
EPP 1.7 Select EPP port type 1.7
On The system will switch on
when power comes back
after a power failure.
Off The system will remain off
when power comes back
after a power failure.
Former- The system will return to
sts the state it was in before
the power failure when
power returns. (i.e: If the
system was on, it will
switch on again, if it was
off, it will remain off)
60
SY-6IBM
Note
Default
Default
Default
Default