SOYO SY-6IBM User Manual page 58

BIOS Setup Utility
PNP/PCI Configuration Setup (Continued)
PNP/PCI
Setup
How to set the BIOS to release the IRQ to the PnP Interrupt pool:
Interrupt
Line
PnP / PCI configuration Integrated Peripherals
IRQ 15 IRQ 15: PCI / ISA PnP On-Chip Secondary PCI IDE: disabled
IRQ 14 IRQ 14: PCI / ISA PnP On-Chip Primary PCI IDE:
IRQ 12 IRQ 12: PCI / ISA PnP
IRQ 7 IRQ 7:
IRQ 4 IRQ 4:
IRQ 3 IRQ 3:
4. Your OS may reassign another interrupt to a PCI slot after BIOS passes
control to the OS, especially if you use Windows 95, 98 or NT.
Slot 1/2/3/4
Use IRQ NO.
Used MEM
base addr
Assign IRQ
For USB
PnP OS
Installed
3-6.4 PNP/PCI Configuration Controls
PNP/PCI
Controls
Setting Description
PCI / ISA PnP Onboard parallel port: disabled
PCI / ISA PnP Onboard Serial port 1: disabled
PCI / ISA PnP Onboard Serial port 2: disabled
Auto
Memory 8K,16K,32K,64K.
length (Please ask your card
provider for the exactly
memory length of this
add-on card.)
Enabled BIOS will assign IRQ for
USB port.
Disabled BIOS won' t assign IRQ
for USB port.
Yes Set this field to [Yes] if
you are running
Windows 95, which is
PnP compatible.
No If the OS you are
running does not
support PnP
configuration.
Setting Description
Interrupt 12 will be released by the PnP
BIOS automatically if the PS/2 Mouse
Port is not used.
55
SY-6IBM
Note
disabled
Default
This item
appears only
when the
[Based MEM
base addr] set
to I/O address.
Default
Default
(If there is any
doubt, set this
field to [No])
Note