Electrical Components; Electrical System - PIAGGIO 633234 Workshop Manual

Characteristics
Transmission
Specification
Transmission
Capacities
Specification
Cooling system
Fuel tank (including reserve ~ 2.5 l)
Rear hub
Engine oil (empty)
Engine oil (at oil and filter change)

Electrical system

1
2 Spark advance (before TDC)
3
4
5
6
Frame and suspensions
Specification
Front suspension
Front fork stroke
Rear suspension
Rear suspension range
X9 Evolution 125-250-500:
Please take note that, starting from chassis serial number ZAPM2300003509521, the front small chas-
sis fixing system has changed in order to improve its locking to the chassis. Therefore we have
introduced:
• N°2 screws drawing 432142
• N°2 4x11x0 external teeth spring washers drawing 012533
• N°2 nuts drawing 968224
CHAR - 10
TRANSMISSIONS
CAPACITIES

ELECTRICAL COMPONENTS

Specification
Ignition type
Spark plug
Battery
Fuses
Generator
FRAME AND SUSPENSIONS
Type
Desc./Quantity
With automatic expandable pulley variator with torque server,
V belt, automatic clutch, gear reduction unit and transmission
housing with forced air circulation cooling.
Desc./Quantity
approx. 1.8 l
~ 14,5 l
~ 250 cc
1.7 lt.
1.5 lt.
Desc./Quantity
Inductive, high efficiency, integrated with injection, vari-
able advance and separate HV coil.
Variable, controlled by the injection controller
CHAMPION RG6YC; NGK CR7EKB
12V-14Ah
n.1 70A_n.1 30A_n.2 15A_n.3 10A_n.4 7,5A_n.2 5A_n.
in three-phase alternating current
Desc./Quantity
Welded structure consisting of steel pipes with asymmetrical
trestle structure, front crosspieces and union members made
of sheet steel.
Hydraulic telescopic fork with dual effect, Ø 40 mm stems and
back pin with couplongs for dual brake calipers.
104 mm
Engine based on oscillating fork pivoted to the chassis by 2-
freedom degree oscillating arm and pair of dual effect hydraulic
shock absorbers with 4-position preload adjustment
76.6 mm (minimum spring preload)
X9 Evolution 500
1 3A