Components Location - PIAGGIO 633234 Workshop Manual

Electrical system
SHOULD ANY INTERVENTIONS TO THE ELECTRIC SYSTEM BE REQUIRED, MAKE SURE THAT
THE LEADS TO THE ELECTRONIC IGNITION DEVICE ARE PROPERLY CONNECTED ACCORD-
ING TO POLARITY AND TO THE LEAD COLOURS.
Components arrangement
1
2
3
4 Electronic control unit remote control switch
5 Engine stop remote control switch
6 Service remote control switch
7 Fuse holder box (n.3 7.5A, n.1 15A)
8 No. 2 start-up remote control switches
9
10 No. 2 buttons for side stand
11
12 Pump unit with level indicator
13
14 Helmet compartment lighting button
15 Helmet compartment glass bowl
16
17 No. 2 rear fuse holder boxes for control unit (n.1 3A, n.1
18 (Diode holder box (n. 2 6A and 2A diodes)
19 Fuse holder box (n.2 7.5A, n.1 15A and 5A)
20 Fuse holder box with base for stand pump remote control
21 Digital instrument unit (11 indicators and led)
22 Analogue instrument unit (5 bulbs)
23 Headlight with n. 2 position bulbs and n.2 high/low beam
24 Front LH direction indicator with 10W bulb
25
ELE SYS - 56
C
OMPONENTS LOCATION
Specification
Side stand switch
Voltage regulator
Side stand control unit
Magneto flywheel 373W
Side stand pump motor
Starter motor
Socket 12V
5A, n.1 10A, n.1 3A)
switch (n.1 70A)
bulbs 55W
Rear brake stop button
X9 Evolution 500
Desc./Quantity