Removing The Driven Pulley; Inspecting The Clutch Drum - PIAGGIO 633234 Workshop Manual

X9 Evolution 500
Installation of belt anti-vibration roller
- Install the anti-flapping roller with the lip facing
the engine crankcase.
- Tighten the central screw to the prescribed tor-
que.
N.B.
TURN THE DRIVEN AND/OR DRIVING PULLEY UNTIL A
CORRECT TENSIONING OF THE BELT IS OBTAINED.
Locking torques (N*m)
Anti-vibration roller screw

Removing the driven pulley

- Remove the driven pulley assembly with the belt.

Inspecting the clutch drum

- Remove the clutch bell.
16.7 ÷ 19.6
Engine
ENG - 93