Fujitsu s3-0801 User Manual page 33

Operations
Configure global
settings
Reboot
Flash upgrade
Administer User
Accounts
Monitor server status
Preemptions listed in the previous table only apply to remote clients. They do not apply
to users accessing the server locally.
Users can become locked out by the Security Lock-out feature if they try to enter
an invalid password five consecutive times. You can configure Security Lock-out
settings as well as unlock any user through the User category.
Modifying users
To add or modify a user:
1. Click the Configure tab in the OBWI, then click the Users category in the left
column.
2. Click the Add User button on the right side of the window to add a new user.
-or-
Click a username listed in the Users column to modify an existing user. The
Add/Modify User window appears.
3. Type the username and password you wish to assign to the user and then
verify the password by typing it in the Verify Password field. The password
must be 5-16 characters and contain alphabetical characters of mixed case
and at least one number.
4. Select the appropriate access level for this user from the drop-down list. If
you select the User option, the Set User Access Rights button becomes
active.
590-1035-640A
Appliance
Administrator
Yes
Yes
Yes
Yes
Yes
4.3 The Explorer Window
User Administrator
No
No
No
Yes
Yes
User
No
No
No
No
No
27