Fujitsu s3-0801 User Manual page 27

Resetting the PS/2 keyboard and mouse on a target device or local
port
This function is for Microsoft Windows-based computers only. Resetting the PS/2 ports
on a target device running any other operating system may require that you reboot that
target device.
If your PS/2 keyboard or mouse locks up, you may be able to re-establish
operation of these peripherals by issuing a Reset command. The Reset
command sends a hot-plug sequence to the target device that requests the
mouse and keyboard settings from the target device to restore functionality.
To issue a remote PS/2 reset command:
1. Select an individual IQ module in the IQ Select dialog box and click Version.
From the IQ Version dialog box, click Reset. A confirmation message will
appear.
2. On the message box, click X or press Escape to exit without sending a Reset
command to the target device.
To reset the local mouse and keyboard:
1. Activate the OSD and click Commands - Device Reset. A confirmation
message will appear.
2. Click X or press Escape to clear the message.
590-1035-640A
3.3 Commands Dialog Box Functions
21