Fujitsu s3-0801 User Manual page 39

Viewing version information
The Versions category displays versions of the switch, FPGA and ASIC firmware.
When you select the Version sub-category, the OBWI will retrieve the firmware
versions from the selected switch. This read-only information displays the version
information for the unit itself. The IQ Versions sub-category allows you to view
and upgrade all of the IQ modules in the system.
IQ versions
The IQ Versions sub-category allows you to view version information for attached
IQ modules. Clicking on the EID displays a window that allows you to upgrade
the IQ module firmware and to reset the IQs if connected to a cascaded device.
Selecting the Enable Auto-Upgrade for all IQs checkbox causes all subsequently
connected IQ modules to have their firmware upgraded to what is available on
the switch. This guarantees that IQ module firmware is compatible with switch
firmware.
When you select the Versions category, the OBWI will retrieve the firmware
versions from the selected switch. The IQ Versions sub-category allows you to
view and upgrade all of the IQ modules and IACs in the system.
On occasions when a cascaded switch is not recognized by the switch, it may be
necessary to reset the IQ module which connects the cascaded switch to the
switch. This can be done using the Reset IQ module button in the IQs sub-
category.
To view version information for IQ modules:
1. Click the Configure tab in the OBWI, then click Versions - IQ Versions in the
left column.
2. Click the EID of the IQ module for which you want to view the firmware
version.
To reset an IQ module:
1. Click the Configure tab in the OBWI, then click Versions - IQ Versions in the
left column.
2. Click the EID of the IQ module you want to reset.
3. Click Reset. A message appears warning you that this function is reserved
for cascaded switches and that resetting the IQ module may result in the
need to reboot the server.
590-1035-640A
4.4 Managing Device Properties
33