Fujitsu s3-0801 User Manual page 20

3. Local Port Operation
To access the OSD Setup dialog box, click Setup on the Main dialog box.
Changing the display behavior
Use the Menu dialog box to change the display order of target devices, change
how the OSD interface is invoked or set a Screen Delay Time for the OSD
interface. This setting alters how target devices will display in several dialog
boxes, including Main, Devices and Scan.
To access the OSD interface Menu dialog box, activate the OSD interface and
click Setup - Menu in the Main dialog box.
To choose the display order of target devices:
1. Select Name to display target devices alphabetically by name.
-or-
Select EID to display target devices numerically by EID number.
-or-
Select Port to display target devices numerically by port number.
2. Click OK.
Depending on the display method selected, the corresponding button will be
depressed in the Main dialog box.
To change how the OSD interface is invoked:
1. Select the checkbox next to one of the listed methods.
2. Click OK.
To set a Screen Delay Time for the OSD interface:
1. Type in the number of seconds (0-9) to delay the OSD interface display after
you press Print Screen. Entering 0 will instantly launch the OSD interface
with no delay.
2. Click OK.
Setting a Screen Delay Time enables you to complete a soft switch without the
OSD interface displaying. To perform a soft switch, see "Soft switching" on page
11.
Controlling the status flag
The status flag displays on your desktop and shows the name or EID number of
the selected target device or the status of the selected port. Use the Flag dialog
box to configure the flag to display by target device name or EID number, or to
14
590-1035-640A