Page 2
Pelican Water Systems shall not be liable for technical or editorial errors or omissions contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
PF3-6 Rev H — Pelican PF3/PF6 Premium Whole House Fluoride Filter Page 3 Table of Contents Table of Contents ............3 Product Operation and Specifications .
PF3-6 Rev H — Pelican PF3/PF6 Premium Whole House Fluoride Filter Page 5 Complete Parts List Note: Pelican supplies the parts below to accommodate a variety of water supply lines. Table 1: Parts List Part Description Qty. Part Description Qty.
Quick Connect Nuts. Notice: The bypass valve(s) included with this system are designed for multiple Pelican water systems. This may result in the arrows on the bypass valve(s) pointing differently than shown. If the arrows on your bypass valve(s) do not match the diagram, remove the red arrows by pulling them straight up, turn them 180°...
1. Attach a garden hose to the Hose Bib Assembly 2. Connect the Hose Bib Assembly to the upflow inlet side of the Bypass Valve and hand tighten 3. Fill the Pelican Whole House FluorideFilter Tank full until water comes out of downflow inlet side of the Bypass Valve 4.
PF3-6 Rev H — Pelican PF3/PF6 Premium Whole House Fluoride Filter Page 8 Fluoride Filter Wash !IMPORTANT! Do not perform the Fluoride Filter Wash until the Fluoride Filter Soak process is complete. Notice: Water will flow out of the downflow inlet side of the Bypass Valve during this process. Be sure you perform this series of steps in a location suitable for water flow.
PF3-6 Rev H — Pelican PF3/PF6 Premium Whole House Fluoride Filter Page 9 Installation Pre-Filter Assembly Pre-Filter Cover Sediment Filter O-Ring Blue Pre-Filter Housing Stand Pipe Figure 5 1. Unscrew the cover from the Blue Pre-Filter Housing. 2. Remove the plastic covering from the Sediment Filter.
PF3-6 Rev H — Pelican PF3/PF6 Premium Whole House Fluoride Filter Page 10 Whole House Fluoride Filter Tank Installation 1. Level the Pelican Whole House Fluoride Filter Notice: If the tank is not level, lift the tank straight up 6 inches and tap it on the ground until the tank stands vertical.
3. Peel off the protective plastic wrap from the stainless steel tank jackets. 4. Add the Pelican logo sticker in the desired location on the tank. 5. Wax stainless steel tank jacket(s) with wax provided or any other non-abrasive auto wax a minimum of 1-2 times per year or as needed based on the installed environment.
Care and Cleaning Premium Whole House Fluoride Filter Your Pelican PF3/PF6 Premium Whole House Fluoride Filter requires care and cleaning after a period of 3 years. Replacement media and instructions can be ordered on-line at www.pelicanwater.com or by calling 877-842-1635.
PF3-6 Rev H — Pelican PF3/PF6 Premium Whole House Fluoride Filter Page 13 Troubleshooting Problem Solution Water leaking at the top of the tank around the head. You may need to turn the head to tighten it. The tank head is pre-installed hand-tight, do not overtighten the head (just turn it snug).
Pelican's liability hereunder shall not exceed the cost of the product. Under no circumstances will Pelican be liable for any incidental or consequential damages or for any other loss, damage or expense of any kind, including loss of use, arising in connection with the installation or use or inability to use the Covered Items or any water treatment system the Covered Items are incorporated into.
PF3-6 Rev H — Pelican PF3/PF6 Premium Whole House Fluoride Filter Page 15 Warranty Registration Form Send in this Warranty Registration Form to validate your warranty or visit www.PelicanWater.com to complete warranty registration form online. Pelican Warranty Registration Form Date Item(s) were Received:...
PF3-6 Rev H — Pelican PF3/PF6 Premium Whole House Fluoride Filter Page 16 !IMPORTANT! Do not use where water is microbiologically unsafe or with water of unknown quality without proper disinfection before or after the filter/softener system. Product Certifications Clack V3007-xx Bypass Fittings – WWQA Gold Seal Certified to NSF/ANSI Standard 44 for material safety and structural integrity only U.S.
Need help?
Do you have a question about the PF3 and is the answer not in the manual?
Questions and answers