Storing Instructions - Bella 14063 Instruction Manual

Base Unit 1

Storing Instructions

1. Make sure the power-supply cord is unplugged from the electrical outlet
and detached from the LINX base unit.
2. Be sure all parts are clean and dry before storing. Never store any LINX
slow cooker unit while it is hot or wet.
3. Store Linx slow cooker unit(s) with each stoneware pot inside
aluminum liner.
4. Remove each of the metal lid rests, wrap in a paper towel and store
inside 1 of the stoneware pots.
5. Cover each lid with a paper towel, then replace each glass lid upside
down over each stoneware pot to store. Remove and store detachable
power-supply cord in stoneware pot until use.
6. Stack (2 or 3) LINX base units for
compact storage. Position each
upper unit's 4 feet into the lower
unit's 4 foot rests (see Figure
6) and stack LINX base units
securely on top of each other.
Add the last glass lid to store.
7. Store stacked LINX base units in
a clean, dry place.
SO-310634 LINX IM_r2.indd 14
Tab
Groove
Base Unit 2 Base Unit 3
Tab
Base Unit 1
14
Figure 5
Groove
Base Unit 2
Figure 6
Non-Skid Feet
Foot rests
2013-05-24 9:06 AM