Burning On The Circuit Board Wd - Electrolux EWM1000 Service Manual

3.23 Burning on the circuit board WD

In case of burning on the main circuit board, check that the problem is not caused by another electrical component (short-circuits, poor insulation, water leakage). Refer
to the figures below in order to identify the component that might have caused the burning according to the position of the burned area.
The circuit board shown below is the version with the greatest number of components: other boards may not feature all these components.
1. Power supply 220V~ (Line Door)
2. Washing heating element
3. Thermostat with manual reset
4. Thermostat with automatic reset
5. Drying heating element 1
QUICK GUIDE AND APPLIANCES LIST
ENV06 EWM11xx EWM21xx EWM25xx/35xx
6. Drying heating element 2.
7. Fan motor
8. Humidity NTC sensor
9. Drying NTC temperature sensor
10. Communication with main board
78/176
599 72 40-80