Connecting A Fax Machine - Vertical Xcelerator IP Owner's Manual

3. Connect Power to the Desk Phone
Use the included power cord and plug one end into the back of the
phone and the other end into the wall outlet. The phone will indicate
that it is configuring its self. Once the phone has finished its
configuration, it is ready to make and receive phone calls.

Connecting a Fax Machine

The Xcelerator phone system allows you to plug in your fax
machine and receive and send faxes without having a separate fax
line. Plug the existing phone cord from your fax machine into the
yellow port on the back of the base unit marked "Fax".
NOTE- If you are having trouble sending or receiving faxes,
please refer to "Using A Fax Machine" on page 40
Vertical Xcelerator IP
Xcelerator Owners Manual AccessLine 04-21-09
18