Ecoair ECO906SQ Installation And Operation Manual page 12

Remote control
SWING UP AND DOWN BUTTON
Names and functions of wireless remote control
TIMER ON
TIMER ON BUTTON
Timer On setting: Signal "ON" will blink
and display, signal
numerical section will become the timer
on setting status. During 5 seconds blink,
by pressing
time value of numerical section, every
press of that button, the value will be
increased or decreased 1 minute. Hold
pressing
it quickly change, the way of change is:
During the initial 2.5 seconds, ten numbers
change in the one place of minute, then
the one place is constant, ten numbers
change in the tens place of minute at 2.5
seconds speed and carry. During 5s blink,
press the Timer button, the timer setting
succeeds. The Timer On has been set up,
repress the timer
will be canceled. Before setting the
Timer, please adjust the Clock to the
current actual time.
TIMER OFF
TIMER OFF BUTTON
press this key to enter into
TIMER OFF setup, in which case
the TIMER OFF icon will blink.
The method of setting is the same
as for TIMER ON.
will conceal, the
or button to adjust the
or button, 2 seconds later,
button, the Timer