Controlling The Accessory In The Command Control Environment - Lionel Rover’s Revenge Owner's Manual

Controlling the accessory in the Command Control environment

(continued)
Accessory Switch Controller wiring and operation
T hree wires (not included) are needed to connect the accessory to the Accessory Switch
Controller (ASC) and a separate accessory transformer. Refer to Figure 4.
1. Attach one wire to the transformer Power/A terminal and connect it to the COMM terminal
on the ASC.
2. Attach a wire to one of the accessory terminals and connect it to a numbered accessory
terminal on the ASC.
3. Attach a wire to the other accessory terminal and connect it to the transformer
Common/Ground/U terminal.
Use the AUX2 button on your CAB-1 Remote Controller to toggle the accessory
ON and OFF.
Figure 4. ASC connections
A U
7