Schedule Menu; Reviewing Day-By-Day Recording Schedule - Honeywell FUSION STREAMER User Manual

8.3

SCHEDULE MENU

With the addition of recording capabilities in the Fusion Streamer Remote Software the Schedule menu allows the creation
of recording schedules for connected cameras.
Note: Storage allocation must be created before local Fusion Streamer Remote recording will occur.
1 Recording Grid
2 Recording Mode
3 Special Day
Recording
4 Pre/Post Alarm
5 Live Buffering
8.3.1

REVIEWING DAY-BY-DAY RECORDING SCHEDULE

1 Click single day selection mode (button changes the multi-day selection mode)
2 Select all days you wish to schedule to apply to
8–5
Select blocks of time to enable recording in and set the recoding type as none, continuous
or motion using the 3 buttons below the scheduling grid.
Set separate recording schedules for individual days of the week. Alternatively click the
single day mode button to switch to multi-day mode. Then configure multi-days at once.
Enable special day mode to create unique one time recording schedules for a specific
date. Deselecting special day mode will return to the normal recording schedule and save
any special recording dates.
Allows users to enable the Pre-Alarm, Sensor Post-Alarm, and Motion Post-Alarm for
selected channels.
Enables live buffering of streaming video to the Fusion Streamer Remote software, which
may affect performance of viewing live streaming video, depending on the connection
speed.