8.5
AUDIO MENU
The Fusion Streamer Audio Menu allows users to adjust settings for audio input, what camera channels will have audio
recording, 2-way audio, and be able to specify a channel for a live audio feed.
1
Audio Input Mode
2
Audio Recording
3
2-Way Audio
4
Live Audio Channel
8.5.1
USING 2-WAY AUDIO
Note: To correctly connect the microphone to the remote computer system, refer to the manufacturer's manual for proper
installation.
1
Connect a microphone and speakers to the remote PC.
2
Connect a microphone to the AUX channel on the back of the Streamer unit. (RCA Plug to 3.5mm Stereo Jack).
3
Connect the speakers to the Audio Out Channel on the back of the Streamer unit. (RCA Plug to 3.5mm Stereo Jack).
4
Open the VSRemote software and connect to the Streamer unit.
5
Enter Setup.
6
Select the Audio tab.
7
Under the 2-way audio section, click Start to begin a 2-way audio session with the Streamer unit.
8
Click End to end the audio session.
Allows users to specify Line-In Mode or Mic. Mode for selected audio channels.
Specifies which channels will have audio recording enabled on.
Starts and stops the 2-Way audio feed.
Specifies which channel with have the Live Audio feed enabled.
8–8