Table of Contents
Advertisement
C O N F I G U R I N G M A X P R O N V R
4
Configuring MAXPRO NVR
Configuring Schedule Based Recording for
Cameras
You can create schedules for camera(s) to record video at recurring intervals for continuous
recording or event based recording (for example, motion event). There are four default
schedules: 24 x 7, Weekday, DayTime, NightTime.
To configure schedules
1.
2.
Performing User Administration
A user in MAXPRO NVR is responsible for performing various operations like viewing video,
reporting alarms, and other video surveillance tasks. You can create two types of users in
MAXPRO NVR.
System Local User
A system local user can access only MAXPRO NVR. This user may not have access to a client
workstation.
Windows User
A windows user can access client workstation and also MAXPRO NVR.
Users and Roles
Roles are provided to a user. These roles comprise in them a set of privileges. When a user is
associated to a role, the privileges that are available for the role are also assigned to the user.
For MAXPRO NVR Software-Only Solution
The first time MAXPRO NVR is installed,two default users are created.
For MAXPRO NVR Single-box Solution
There are 2 default users created.
Note:
To perform user administration
1.
2.
68
Click the Configurator tab. The System page appears by default.
Click the Schedule tab to open the Schedule page.
•
admin/trinity - Non-Windows user.
•
Installed user - Windows user. You enter the credentials for this user while installing
the MAXPRO NVR software.
•
admin/trinity - Non-Windows user
•
Administrator/Password1 - Windows user
Refer to the
MAXPRO NVR Operator's Guide
roles available in MAXPRO NVR.
Click the Configurator tab. The System page appears by default.
Click the User tab to open the User page.
for more information on the various
MAXPRO NVR 3.1 Commissioning and Installation Guide
Advertisement
Table of Contents
