Camera Menu; Setting Motion Regions - Honeywell FUSION STREAMER User Manual

8.2

CAMERA MENU

The Camera Menu includes the original features and functions of the web based software with the addition of Motion
Detection, Frame Rate setup, and an on screen display of the camera currently selected.
1 Camera Display
2 Pan/Tilt
3 Frame Rate
4 Adjust
5 Motion
8.2.1

SETTING MOTION REGIONS

1 If the whole frame is going to be designated as a motion region, click Select All, if not click Clear All.
2 Left click the mouse and hold down the mouse button.
3 Drag the cursor to draw the motion region.
4 Repeat steps 2 through 3 if you want multiple regions.
5 Adjust the Sensitivity as needed.
6 Select the event that will correspond with the motion detection under Event On Detect.
7 Click Apply
Displays current camera video feed and when Motion Detection is enabled allows you to
define motion sensitive regions on the camera.
Displays the camera that is currently in use and allows for PTZ setup.
Allows users to configure frame rates of camera channels.
Adjusts the brightness, contrast and hue of the current camera channel
Enable Motion Detection and configure several settings such as sensitivity, Duration, and
Clear or Set all motion detection regions for the camera.
8–2