Outgoing Calls
Ò
< Speech
Ò
Ó
< Speech
Ò
< Clear
76
If you need to make an urgent call and all lines are busy you can
intrude and force release a line:
Press to intrude.
Inform the parties on the line about the situation.
Press to force release.
The call is disconnected and the terminal is cleared.
Start dialing again, use either 'Via any line' or 'Via a specific line'.
Via an ISDN line or via a direct line to
another exchange within the private
network
z
Dial the code for the ISDN external line or for the direct line.
z
Dial the external number.
The dialed number is shown temporarily, then the display shows
(example):
C= 1 I= 0
TRK
010003012
Press to terminate the conversation.
The call is disconnected and the terminal is cleared.
Note: If all lines are busy
OUTGOING <-
CONGEST.
15:25
is shown.
Dialog 4224 Operator